How to Charge Fitbit Inspire, HR, Flex, Alta, Versa, Surge, Blaze, Ionic Without Charger?

How To Charge Fitbit Inspire, Hr, Flex, Alta, Versa, Surge, Blaze, Ionic Without Charger

Who doesn’t love Fitbit smartwatches? In this era, with Fitbits, you can accomplish the generic and also the not-so-generic tasks. Starting with telling you the time to inspiring you to be in tip-top physical shape, the Fitbit line can do it all. 

Since the advantages of owning a Fitbit is so vast, we must learn how to charge a Fitbit smartwatch. Fitbit will not provide you with a charger but only the charging cable. Even then, with such a simple tool, we forget to carry the charging cable. So, what to do next? 

Don’t worry; tune in to this article as I will guide you on how to charge your Fitbit without a charger. Let’s see how it’s done.

How to Charge Fitbit Inspire Without Charger?

Whether it’s to receive calls on the run, align your REM cycle or keep track of your physical health, the Fitbit never backs down in helping you. Due to its abundant benefits, it has become a part of our daily lives. But all hell might break loose, for example, when you’re traveling, and you forget the cable at home. Don’t worry, there are simple solutions to this issue.

Your Fitbit Inspire, just like any other Fitbit should come with a charging cable. But I’m here to tell you what you can do when the cable’s missing. Follow these steps to charge your Fitbit model when you’re in a sticky spot.

Step 1 – Get ahold of any USB cable. Make sure that you won’t have to use this USB cable for any other appliances because you will have to cut it.

Step 2 – Take a nail clipper and slowly start chipping into the wire to cut off the end of the cable. 

Step 3 – Remove the outer insulated cover of the wire using the nail clipper. Be careful with steps 2 and 3, as they are crucial. Consequently, while snipping off these bits, ensure that you’re not cutting off too much of the wires inside.

Step 4 – You should be exposed to four wires. Snip off all the other wires except the red and black ones using the nail cutter.

Step 5 – Expose the insides of the red and black wires and coil them tightly. 

Step 6 – Stick the freshly cut ends to one end of a tape. Take your Fitbit and place the Fitbit’s charging dots on the wire ends. Secure the entire DIY with the tape. 

Step 7 – Connect the other end of the USB port to your laptop or any other device on hand. Check to see if it’s charging. Wait for it to charge fully, and voila!

How to Charge Fitbit Inspire Hr Without Charger?

The Fitbit Inspire editions have been around for the past few years. Needless to say, its benefits and usability know no bounds and limits. However, that might be cut short if you don’t have the charging cable nearby.

Here’s the scoop on how to charge your Inspire HR Fitbit without the charger.

Step 1 – Purchase or take any regular USB and cut it seamlessly with scissors. After cutting the cable, move on to the next step once you expose the red and black wires.

Step 2 – Engage the exposed wires to the electric dots of your Inspire HR Fitbit. If you’ve placed it correctly, it should notify you while charging.

Step 3 – Once it shows the charging sign, you can secure the wires to the Fitbit with tape.

How to Charge Fitbit Flex Without Charger?

The Fitbit Flex has been so raved by its users because of its seamless functionality in helping you sync your sleep cycle, exercises, steps taken, and so much more. Don’t get fooled by its superior technology, as the Flex seems to have the highest comfort in usage and wearability too.

So, now it’s time to see how you can use this multifunctional tool without a cable.

What You Will Need

  • A marker
  • USB 
  • Jumper wires
  • Small piece of cardboard

Step 1 – Make two holes at one end of the small cardboard piece according to the charging pins. You can make the holes using a pin.

Step 2 – Now, with a marker, mark the left hole as positive and the right hole as negative. This will indicate where the wires will go.

Step 3 – Insert the jumper wires within those holes. Once the wires have been inserted respectively, you can secure the cardboard piece to the wires using glue from a glue gun.

Step 4 – Let it dry. Ensure that they stick and are sturdy. Fold the rest of the cardboard according to the Fitbit’s size so you can place it nicely while charging.

Step 5 – Take the old USB and connect the USB’s wires to the jumper wires ends, which are not attached to the cardboard. Ensure that you’re joining the negative wires to the negative ones and vice versa.

Step 6 –Now plug in the USB to any reliable port nearby and connect it to your Fitbit Flex. Turn on the Fitbit to ensure that it’s charging.

How to Charge Fitbit Alta Without Charger?

Typically, the Fitbit Alta has gained all of its fame due to unparalleled fitness tracking capacities. It tries to compete with top-tier fitness tracking devices and has surpassed generic expectations in the way.

While searching for a cable alternative, you can check a few points for your Fitbit Alta.

  • Charge it at room temperature.
  • Avoid USB battery packs.
  • Try to use UL-certified wall chargers.

However, when these aren’t an option, keep reading to know what you can do for the time being to charge your Alta.

Step 1 – Grab any regular USB and cut it at the rear end to expose the black and red wires inside.

Step 2 – With the help of tapes, connect these wires to the rear of your Fitbit Alta, specifically where the electrical dots are situated.

Step 3 – Your Alta Fitbit should be charging by now if you’ve placed the wires correctly. However, you can rearrange your DIY until it does.

How to Charge Fitbit Versa Without Charger?

The Fitbit Versa holds a respectable library of apps and an attractive design. Moreover, it’s a favorite for those who want minimal app benefits but maximum battery output and life. 

So, here’s how you can maintain its charge without a charger.

Step 1 – First, you need to grab any regular USB that you might have lying around and cut it in half. After cutting, you should notice some black and red wires inside.

Step 2 – Get a sturdy tape and connect this cut end of the USB to the back of your smartwatch. Ensure that you have connected it to the section where the electric dots are visible on your Fitbit.

Step 3 – After connecting the two components with a tape appropriately, you should notice that the Fitbit is charging. However, if your Fitbit doesn’t notify you about getting charged, you can rearrange the tape and wires to the electrical dots.

How to Charge Fitbit Surge Without Charger?

Are you as impressed with the Fitbit Surge’s abilities to track and report you with real-time workout notifications as I am? It would be a shame to have to let go of such a fantastic tool, even if it’s for a short period only because you can’t seem to find the cable.

Let’s see how you can get out of this mess.

Step 1 – Procure any mobile USB charger that you don’t need and snip it to reveal the wires inside.

Step 2 – You will notice a pair of black and red wires. Grab these wires and connect them to the back of your Surge Fitbit, where the electrical charging dots are located.

Step 3 – Switch on the smartwatch to check if it’s charging.

How to Charge Fitbit Blaze Without Charger?

Fitbit Blaze is technically a world-class fitness tracker that you can wrap around your wrist. But, what can you do when the power cable has gone MIA on you? Here’s what you need to do.

You can opt for any UL-certified USB wall charger and avoid using and USB hub or pack for this model. You can also do the following.

Step 1 – Cut a generic USB.

Step 2 –Connect the black and red wires to the electrical dots of the Blaze Fitbit at the back.

Step 3 –And let it charge by securing it with tape.

How to Charge Fitbit Ionic Without Charger?

You might think that your power cable ran away. But get this – the Fitbit Ionic can last four days with a full charge. However, its comfortable and optimized features might not come in handy after that time limit.

Therefore, here’s what you need to do for a charger replacement.

Step 1 – Split a standard USB cord into two.

Step 2 – Utilizing tape, attach and connect the red and black wires to the electrical dots of the Ionic Fitbit.

Step 3 – If it notifies you about charging, set it aside for an hour or so.

Final Words

I hope you’re not fretting any longer on this matter. To sum it up, since mostly all the Fitbit models come with a charging cable, there’s slight to no change in the alternative charging ways either. 

But that’s the best part about it. Once you get a hold of these DIYs, you don’t have to toss your Fitbits until you get to reunite with the charging cable. And if you’ve lost the cable – that’s not even an option!

The tricks that I’ve discussed indeed need some practice, trial, and error. However, desperate times call for desperate measures. And if you’ve read this far into the article, rest assured, you must’ve been panicking. 

But now, you can get your hands dirty to juice up your favorite Fitbit.

Elena Davis

If you are a tech-savvy person, then maybe we have something in common. My name is Elena Davis, and I love everything technology. Testing new wearable technology products and review them is one of my favorite things. I’m contributing my 10+ years experiences in product reviewing for multiple digital brands and companies.

Recent Posts